Zirconia quá xám?
Mar 04, 2022
Mục đích chính của hầu hết các nhà sản xuất khối zirconia là đảm bảo tông màu, màu sắc và giá trị của khối zirconia. Tuy nhiên, các kỹ thuật viên được yêu cầu nhận thấy rằng khi họ sử dụng các vật liệu này, việc phục hình cho kết quả có giá trị thấp hoặc zirconia xám.
Next, let's analyze the reasons together:
This may be due to the fact that this generation of cubic zirconia blocks requires a more precise sintering process, all zirconia blocks have information on use (IFU) on the packaging, including the appropriate sintering cycle. When working with zirconia blocks, the manufacturer's sintering instructions must be followed. Too high sintering temperature or too long holding time at the highest temperature will result in a lower zirconia value or too gray.
Điều gì sẽ xảy ra nếu bạn đã làm theo tất cả các quy tắc và kết quả vẫn không lý tưởng? Lý do cho điều này là gì?
Trước tiên, bạn nên kiểm tra lò thiêu kết của mình và tìm các yếu tố sau:
●.Has the furnace not been calibrated for a long time?
●.Is the furnace calibrated correctly?
Khi lò nung lệch khỏi nhiệt độ tối đa được lập trình, nhiệt độ sẽ tiếp tục tăng và trở nên nóng hơn. Giả sử bạn đặt nhiệt độ ở 1400 độ, nó thực sự có thể là 1500 độ.
If you are using an IFU for a sintering cycle and showing any low value grey results for the former zirconia, you should calibrate your furnace. You can also try lowering the maximum temperature by 40 degrees on the next cycle. If the result is still too grey, you can try reducing the temperature by 25 degrees at a time until the value is correct. Once you get the correct value, you've probably reached the correct sintering temperature. Note that all zirconia will become more opaque as the temperature is lowered.
Nếu bạn muốn biết thêm về lò thiêu kết,xin vui lòng bấm vào đây!Hoặc để lại tin nhắn để chúng tôi có thể liên hệ với bạn.








